9
En
6
Latch the holder.
Keeping the latch pressed, slide it
clockwise to the LOCK position.
D
Batteries
Replace the batteries if it takes more than 30seconds for the fl ash-ready
lamp to light red after the fl ash fi res at full power. Before inserting and re-
placing batteries, wipe any water from the unit and be sure your hands are
dry; during the procedure, be careful that no drops fall on or into the prod-
uct from your hair or wet-suit. To prevent water entry, check that the bat-
tery holder is inserted and securely latched after replacing the batteries.
To Next Page