What does 'O' flashing on my Nikon VQA090AA mean?
If 'O' flashes on the screen of your Nikon Digital Camera, it indicates that the camera clock hasn't been set. Images and movies saved before setting the clock will be dated incorrectly. Correct this by setting the time zone and date in the setup menu.
Why does my Nikon Digital Camera show the time zone and date screen every time I turn it on?
If the screen for setting the time zone and date appears every time you turn on your Nikon Digital Camera, the clock battery is exhausted, and all settings have been restored to their default values. You will need to configure the camera settings again.
How to make the screen brighter on my Nikon Digital Camera?
If the monitor on your Nikon Digital Camera is hard to see, it might be because the surrounding area is too bright. Try moving to a darker place or adjusting the screen brightness.
Why can't I switch to shooting mode on my Nikon VQA090AA?
If you cannot switch to shooting mode on your Nikon Digital Camera, disconnect the HDMI or USB cable.
Why is there no shutter sound on my Nikon VQA090AA?
If no sound is produced when the shutter is released on your Nikon Digital Camera, check if 'Off' is selected for Shutter sound in the Sound settings menu. Note that some shooting modes do not produce sound, even when 'On' is selected. Also, ensure that you are not blocking the speaker.
Why do my photos look smeared on my Nikon VQA090AA?
If images appear smeared on your Nikon Digital Camera, the lens is likely dirty. Clean the lens to resolve this issue.
Why do my Nikon Digital Camera photos have noise?
If randomly spaced bright pixels (“noise”) appear in your Nikon Digital Camera images, it's likely because the subject is dark, and the shutter speed is too slow, or the ISO sensitivity is too high. You can reduce noise by using the flash or specifying a lower ISO sensitivity setting.
Why is my Nikon Digital Camera correcting other areas besides red eyes?
If areas other than red eyes are being corrected on your Nikon Digital Camera, use any shooting mode other than Night portrait, and change the flash mode to any setting other than auto with red-eye reduction. Then, try taking the picture again.
Why can't I select 'Connect to smart device' on my Nikon Digital Camera?
If you cannot select 'Connect to smart device' on your Nikon Digital Camera, ensure the following: * If it's the first time establishing a wireless connection, refer to the included “SnapBridge Connection Guide”. * Use a sufficiently charged battery. * Insert a memory card with sufficient free space. * Disconnect any HDMI or USB cables. * In the Network menu, set Airplane mode to Off, Choose connection to Smart device, and Bluetooth M Connection to Enable. * Enable Bluetooth on your smart device.
General| Brand | Nikon |
|---|---|
| Model | VQA090AA |
| Category | Digital Camera |
| Language | English |
To Next Page
