24
Specifications
Exposure
Metering
system
TTL metering using camera image sensor
Metering mode
•
Matrix metering
•
Center-weighted metering: Weight of 75% given
to 12 mm circle in center of frame; weighting can
instead be based on average of entire frame
•
Spot metering: Meters 4 mm circle (about 1.5% of
frame) centered on selected focus point
•
Highlight-weighted metering
Range
−
3 – +17 EV
* Figures are for ISO 100 and f/2.0 lens at 20 °C/68 °F
Mode
•
b
: Auto, P: programmed auto with flexible
program, S: shutter-priority auto, A: aperture-
priority auto, M: manual
•
U1, U2 and U3: user settings modes
Exposure
compensation
–5 – +5 EV (choose from step sizes of
1
/
3
and
1
/
2
EV)
available in modes P, S, A, and M
Exposure lock Luminosity locked at detected value
ISO sensitivity
(Recommended
Exposure
Index)
ISO 100–51200 (choose from step sizes of
1
/
3
and
1
/
2
EV); can also be set to approx. 0.3, 0.5, 0.7, or 1 EV
(ISO 50 equivalent) below ISO 100 or to approx. 0.3,
0.5, 0.7, or 1 EV (ISO 102400 equivalent) above ISO
51200; auto ISO sensitivity control available
Active
D-Lighting
Auto, Extra high, High, Normal, Low, and Off
To Next Page
