33
73¡ stroke of film-advance lever advances the film and cocks the
shutter and operates the frame counter.
Lift-up type rewind crank. ÒRÓ setting on shutter speed dial is rewind
position.
Hinged to facilitate f1lm loading.
Synchronizes with almost all types of flashhulbs at all speeds and with
electronic flash at speeds up to 1/60 second. Watertight socket houses
FP and X contacts.
Indicates number of frames exposed up to 36, resets itself
automatically when camera is opened for reloading.
Impregnated aluminum alloy die casting. Three-piece construction
(outer housing, interior body, lens) sealed against water and pressure by
O-ring gaskets.
Accepts sportsfinders and other accessories.
Located on camera bottom. Has synch socket inside and can be
replaced with gun connector for use with ordinary flash or speedlight
units on land.
3.9Ó x 5.1iÕx 1.9Ó (99mm x 129mm x 47mm)
20 oz (540 gr)
Film advance
Film rewind
Film -pressure plate
Flash synchronization
Frame counter
Camera Body
Accessory shoe
Tripod socket
Dimensions (body only)
Weight (body only)
To Previous Page
Loading...