Niles CS12V User Manual

I N S T A L L A T I O N G U I D E
CS12V
CURRENT SENSING 12VOLT TRIGGER
DS00430A-1 CS12V.indd 1 7/25/06 5:23:24 PM

Niles CS12V Specifications

General

Brand	Niles
Model	CS12V
Category	TV Accessories
Language	English

Summary

Introduction

Features and Benefits

Installation Considerations

CS12V Product Overview

Details the components and features of the CS12V, referencing Figure 1 for identification.

Placement of the CS12V

Table-top Placement

Describes placing the CS12V on a floor or shelf behind the equipment.

Wall-mount Placement

Details mounting the CS12V to a wall or equipment cabinet.

Installation

Connect Component AC Power Cable

Plug the component's AC power cable into the CS12V's current sensing outlet.

Connect 12VDC Trigger Output Cable

Connect the 12VDC trigger output cable to the CS12V's 3.5mm jack.

Verify Trigger Cable Connection to Device

Ensure the trigger cable is properly connected to the device being triggered.

Connect CS12V AC Power

Connect the CS12V's power cord to the unit and an unswitched AC outlet.

Operation

Setting Component OFF State

Calibrate the CS12V by setting the connected component's 'OFF' state using the Idle Current Detect button.

Select 12V DC Trigger Delay

Choose one of three delay settings for the 12V DC trigger output via the delay switch.

Specifications

Limited Warranty