Need help?Do you have a question about the Niles IntelliPad and is the answer not in the manual?
General| Power Supply | 12V DC |
|---|---|
| Backlighting | Yes |
| Power | 12V DC |
| Display | LCD |
| Connectivity | RS-232 |
| Category | Keypad |
| Mounting | Wall-mount |
Explains the status feedback feature for power status and system synchronization.
Details how one-button macros work with power synchronization for source selection.
Provides steps for erasing the entire memory before starting new programming.
Explains the two types of IR commands and when to use press and hold.
Details the step-by-step process for teaching IR commands to the IntelliPad.
Guides on teaching preamp/receiver commands to the System page.
Details teaching IR commands for individual source components onto Source Pages.
Explains how to erase a single IR command or code.
Guides on planning and creating sequences of commands.
Provides detailed steps for programming a sequence of IR commands.
Guides on programming single IR commands using the Press and Hold feature.
Explains how to program sequences using the Press and Hold feature.
Provides steps for transferring programs from one IntelliPad to another.
Explains system operation using Status Feedback and Speaker Relay features.
Details the five functions performed by a single press of a Source Select key.
Addresses problems with the IntelliPad not learning IR commands from certain brands.
Provides guidance on reteaching IR commands for sequence issues.
Explains issues with continuous volume control and how to manage them.
Suggests checking flasher levels for component operation issues.
Discusses system-wide issues, connections, and interference preventing operation.
Lists compatibility with remote controls using carrier frequencies between 23 and 107 kHz.
To Next Page
