Niles SPK-1 - Preamp, Can also be Triggered by the 12 Volt Output of a Niles APC-2, AC-3, AVS; Volt Control Output for Activating Other Niles Devices such as an APC-2, AC-3, AVS; Features

12 pages

To Next Page

To Previous Page

FEATURES

• Replaces manually operated A-B switches

• Audio power handling: 600W per channel

• SPK-1 is activated by 12Volt DC signal (100mA minimum)

• Requires 12Volt DC adapter to trigger SPK-1 from the switched outlet of a receiver or

preamp, can also be triggered by the 12Volt output of a Niles APC-2, AC-3, AVS-2,

SAS-1 or RFS-1

• 12Volt control output for activating other Niles devices such as an APC-2, AC-3, AVS-2,

SAS-1 or RFS-1

• Note: This unit is not a Signal-Sensing Switcher; if signal-sensing is required use the

SAS-1 or ABS-1

• Premium nickel-plated five-way binding post connectors

• Two-year limited warranty

DS00059BCN-0 SPK-1.indd 4 4/24/06 4:28:16 PM

Other manuals for Niles SPK-1