Nilfisk-Advance ES4000 User Manual



ES4000 How To
Prepare for use
1
Familiarize yourself
with the control panel
and how each item
functions before
operating this machine.
2
Turn on the key switch
and check the Battery
Indicator and hour
meter.
3
Fill the solution tank 1/3
with water then add
appropriate chemical.
(Temperature should not
exceed 130°F).
4
When using the
detergent dispensing
system Do not mix
chemicals in the
solution tank
(use plain
water).
5
Use the Sweep Mode
to clean area prior to
extracting (You must
attach the dry hose when
using sweep mode) .
6
Clean area using
Sweep Mode to
vacuum debris from the
entire area to be
cleaned.
7
Pre-spray spots and
heavy traffic areas
before extracting.
8
Gather accessories
(if
needed)
.
9
Drive machine to work
location.

Nilfisk-Advance ES4000 Specifications

General

Brand	Nilfisk-Advance
Model	ES4000
Category	Floor Machine
Language	English

Summary

Prepare for Use

Familiarize Control Panel

Familiarize yourself with the control panel and how each item functions before operating.

Check Battery and Hour Meter

Turn on the key switch and check the Battery Indicator and hour meter.

Fill Solution Tank

Fill the solution tank 1/3 with water then add appropriate chemical.

Pre-Clean with Sweep Mode

Use the Sweep Mode to clean area prior to extracting.

Vacuum Debris with Sweep Mode

Clean area using Sweep Mode to vacuum debris from the entire area.

Extract Mode Machine Operation

Review Control Panel Modes

Initiate Extract Mode Cleaning

Clean area using the Extract Mode: press Extract On switch.

Connect Wet Pick-up Hose

Drive for Extraction

Using Cleaning Attachments

Post-Cleaning: Empty Tank

Review Maintenance Schedule

Maintenance and Storage

Prepare for Storage

Inspect and Clean Hoses/Brushes

Clean Machine Components

Yearly Maintenance (Authorized Service)

Check vacuum motor and brush motor carbon brushes.