EasyManua.ls Logo

Nilfisk-Advance Clarke EX40 18LX User Manual

Nilfisk-Advance Clarke EX40 18LX
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Form No. 56091181 9/2015 REV A
Instructions For Use - Original Instructions / Instrucciones de uso / Mode d’ emploi
Models: 56265504 (16ST), 56265505 (18LX)
This book has important information for the use and safe operation of this machine. Failure to read
this book prior to operating or attempting any service or maintenance procedure to your Clarke ma-
chine could result in injury to you or to other personnel; damage to the machine or to other property
could occur as well. You must have training in the operation of this machine before using it. If your
operator(s) cannot read this manual, have it explained fully before attempting to operate this machine.
All directions given in this book are as seen from the operators position at the rear of the machine.
English (A2 - A12)
Español (B2 - B12)
Français (C2 - C12)
READ THIS BOOK
LEA ESTE MANUAL
LISEZ CE MANUEL
ES
EN
FR
EX40 18LX, EX40 16ST

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Nilfisk-Advance Clarke EX40 18LX and is the answer not in the manual?

Nilfisk-Advance Clarke EX40 18LX Specifications

General IconGeneral
BrandNilfisk-Advance
ModelClarke EX40 18LX
CategoryFloor Machine
LanguageEnglish

Summary

Product Introduction and Identification

Reading the Manual and Safety Warning

Emphasizes manual importance and provides crucial safety notice for operation.

Product Details and Initial Setup

Manual Purpose and Modifications

Explains manual's aim, product usage, service, and modification policies.

Nameplate and Uncrating

Details machine identification via nameplate and uncrating instructions.

Chemical Hazard Warning

Provides a critical warning concerning chemical content in the product.

General Safety Guidelines

Key Safety Precautions

Lists essential safety rules to follow when using the appliance.

Electrical Safety and Grounding

Grounding Procedures and Risks

Details grounding, dangers of improper connection, and extension cord use.

EX40 18LX Machine Components

EX40 18LX Main Parts Diagram

Illustrates and lists the primary components of the EX40 18LX model.

EX40 18LX Further Components

EX40 18LX Secondary Part Identification

Illustrates and lists additional components of the EX40 18LX model.

EX40 16ST Machine Components

EX40 16ST Main Parts Diagram

Illustrates and lists the primary components of the EX40 16ST model.

EX40 16ST Further Components

EX40 16ST Secondary Part Identification

Illustrates and lists additional components of the EX40 16ST model.

Control Panel Identification

Control Panel Features

Identifies and explains the main power switch, breaker, and accessory switch.

Machine Preparation

Filling the Solution Tank

Step-by-step guide for filling the solution tank with water and detergent.

Pre-Operation Tasks

Covers pre-vacuuming, pre-spraying, and planning the cleaning area.

Machine Operation

Operating Procedures

Instructions for adjusting handle, selecting modes, and running the machine.

Using Accessory Tools

Guide for connecting and operating the machine with accessory tools.

Hard Floor Kit Installation

Squeegee Tool Attachment

Instructions for replacing the vacuum shoe with an optional squeegee tool.

After Use and Maintenance

Post-Operation Cleaning

Procedures for emptying tanks, cleaning parts, and storing the machine.

Maintenance Schedule Details

Lists daily, weekly, and yearly maintenance tasks for the machine.

Vacuum Shoe Maintenance

Instructions for daily cleaning and maintenance of the vacuum shoe.

Routine Maintenance Tasks

Nozzle, Filter, and Cord Care

Weekly cleaning of spray nozzle, filter, and inspection of power cord.

Brush Maintenance and Replacement

Daily checks, storage, and steps for brush removal and installation.

Troubleshooting Guide

Circuit Breaker and Pickup Issues

Diagnosing circuit breaker trips and poor water pickup problems.

Solution Flow Troubleshooting

Steps to resolve inadequate or blocked solution flow.

Accessories and Specifications

Optional Accessories

Lists available optional accessories and different hose/wand options.

Technical Specifications

Provides detailed technical data, dimensions, and material composition.

Related product manuals