Need help?Do you have a question about the Nilfisk-Advance CS7010 and is the answer not in the manual?
General| Brand | Nilfisk-Advance |
|---|---|
| Model | CS7010 |
| Category | Floor Machine |
| Language | English |
Machine identification and post-delivery inspection procedures.
General safety warnings, cautions, and policy on machine modifications.
Specific safety instructions and warnings for machine operation.
Restrictions on usage, storage recommendations, and saving instructions.
Step-by-step procedures for operating the hopper safety bar.
Safety guidelines for jacking and transporting the machine.
Procedures for safely towing or pushing a non-operational machine.
Detailed list and illustration of machine components and their locations.
Identification and function of buttons, switches, and indicators on the control panel.
Explanation of various main display screens for different models.
Explanation of various warning and attention icons displayed on the panel.
Essential checks before each use and planning for cleaning operations.
Guidance on selecting and changing engine oil for different models.
Procedure for checking and maintaining engine coolant levels.
Instructions for air filter maintenance and safe fueling practices.
Details on appropriate fuel types for different engine models.
Procedures and warnings for installing the machine's battery.
Steps for charging batteries and checking electrolyte levels.
Procedures for installing and rotating the main broom.
Step-by-step guide for mounting scrub brushes.
Instructions for filling the main solution and DustGuard tanks.
Procedures for starting diesel, LPG, and gasoline/petrol engines.
How to use the speed switch and understand engine speed settings.
Procedures for preparing and purging the detergent system.
Steps to program minimum and maximum detergent concentrations.
Step-by-step guide for operating the machine in sweeping mode.
Maintenance of the dust control filter during sweeping.
Steps for safely emptying the machine's debris hopper.
Step-by-step guide for operating the machine in scrubbing mode.
Troubleshooting water pick-up and managing the recovery tank.
Procedures for stopping scrubbing and actions after completion.
Tasks to perform after use, including cleaning and storage.
Specific steps for shutting down diesel, LPG, and gasoline/petrol engines.
Procedure for checking the machine's hydraulic oil level.
Recommended daily and weekly maintenance checks and cleaning.
Maintenance tasks scheduled at various hour intervals.
Locations for monthly lubrication with grease and light machine oil.
Instructions for charging the battery and checking electrolyte levels.
Procedures for charging the battery pack on hybrid models.
Steps for rotating or replacing the main broom for optimal performance.
Procedure for adjusting the main broom height for cleaning effectiveness.
Steps for adjusting side broom position and replacing worn brushes.
Procedures for reversing or replacing front and rear squeegee blades.
Method for adjusting the squeegee angle for proper floor drying.
Procedures for removing and cleaning the dust control filter.
Steps for reversing or replacing side skirt deck blades.
Identification of common causes for circuit breaker trips and their reset procedures.
Mapping of circuit breakers to protected components and their ratings.
Troubleshooting common problems like poor water pick-up, scrubbing, and sweeping performance.
Diagnosing and resolving issues like no drive, no detergent flow, or non-operational brooms.
Technical data for CS7000 Hybrid Petrol, LPG, and Diesel models.
Technical data for the CS7000 ePower (Battery) model.
Analysis of machine materials and their recyclability percentages.
To Next Page