Nilfisk-Advance CS7010 User Manual

A-6 / ENGLISH
A-6 - FORM NO. 56041980 - CS7000
HOPPER SAFETY BAR
WARNING!
Make sure the Hopper Safety Bar (23) is engaged whenever attempting to do any maintenance work under or near the raised hopper.
The Hopper Safety Bar (23) holds the hopper in the raised position to allow work to be performed under the hopper. See Figure 1.
NEVER rely on the machine’s hydraulic components to safely support the hopper.
A - To Engage Hopper Safety Bar:
1. Press and hold the hopper raise switch to raise the hopper.
2. Pull the hopper safety bar handle (21) toward you to retract the safety bar (23).
3. Press and hold the hopper lower switch to lower the hopper until it contacts the hopper safety bar.
B - To Disengage Hopper Safety Bar:
1. Press and hold the hopper raise switch to raise the hopper slightly so it lifts off of the hopper safety bar.
2. Push the hopper safety bar handle (21) toward the front of the machine to extend the safety bar (23).
3. Press and hold the hopper lower switch to lower the hopper.
FIGURE 1

Nilfisk-Advance CS7010 Specifications

General

Brand	Nilfisk-Advance
Model	CS7010
Category	Floor Machine
Language	English