ENGLISH / A-3
FORM NO. 56041980 - CS7000 - A-3
PARTS AND SERVICE
Repairs, when required, should be performed by your Authorized Nilf sk Service Center, who employs factory trained service personnel, and
maintains an inventory of Nilf sk original replacement parts and accessories.
Call the Nilf sk Authorized Service named below for repairs or service. Please specify the Model and Serial Number when discussing your
machine.
(Dealer, aff x service sticker here.)
NAMEPLATE
The Model Number and Serial Number of your machine are shown on the Nameplate. One nameplate is located on the wall of the operator’s
compartment just below the circuit breaker decal. The second nameplate is located on the chassis beneath the recovery tank. This information is
needed when ordering repair parts for the machine. Use the space below to note the Model Number and Serial Number of your machine for future
reference.
MODEL ________________________________________________
SERIAL NUMBER ________________________________________
DATE CODE ____________________________________________
Note: Reference the separately supplied engine manufacture’s maintenance and operator manual for more detailed engine specif cation and
service data.
UN-CRATING
Upon delivery, carefully inspect the shipping crate and the machine for damage. If damage is evident, save all parts of the shipping crate so that
they can be inspected by the trucking company that delivered the machine. Contact the trucking company immediately to f le a freight damage
claim.
1 After removing the crate, remove the wooden blocks next to the wheels.
2 Check the engine oil and coolant levels.
3 Check the hydraulic oil level.
4 Read the instructions in the Preparing the Machine For Use section of this manual, then f ll the fuel tank.
5 Place a ramp next to the front end of the pallet.
6 Read the instructions in the Operating Controls and Operating the Machine sections of this manual and start the engine. Slowly drive the
machine forward down the ramp to the f oor. Keep your foot lightly on the brake pedal until the machine is off the pallet.
CAUTION!
• Use extreme CAUTION when operating this machine. Be certain that you are thoroughly familiar with all operating instructions
before using this machine. If you have any questions, contact your supervisor or your local Nilf sk Industrial Dealer.
• If the machine malfunctions, do not try to correct the problem unless your supervisor directs you to do so. Have a qualif ed
company mechanic or an authorized Nilf sk Dealer service person make any necessary corrections to the equipment.
• Use extreme care when working on this machine. Loose clothing, long hair, and jewelry can get caught in moving parts. Turn the
Key Ignition Switch OFF and remove the key before servicing the machine. Apply the parking brake before getting off of the machine.
Use good common sense, practice good safety habits and pay attention to the yellow decals on this machine.
• Drive the machine slowly on inclines. Use the Brake Pedal (38) to control machine speed while descending inclines. DO NOT turn
the machine on an incline; drive straight up or down.
• The maximum rated incline for sweeping and scrubbing is 10°. The maximum rated incline during transport is 10°.
MODIFICATIONS
Modif cations and additions to the cleaning machine which affect capacity and safe operation shall not be performed by the customer or user
without prior written approval from Nilf sk-Advance Inc. Unapproved modif cations will void the machine warranty and make the customer liable for
any resulting accidents.
To Next Page
Loading...
Need help?
General
