EasyManuals Logo

Nilfisk-Advance CS7010 User Manual

Nilfisk-Advance CS7010
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
A-14 / ENGLISH
A-14 - FORM NO. 56041980 - CS7000
ENGINE OIL – GASOLINE / PETROL, LP
Check the engine oil level when the machine is parked on a level surface and the engine is cool. Change the engine oil after the f rst 50 hours of
operation and every 200 hours after that. Use any SF or SG rated oil meeting API specif cations and suited to seasonal temperatures. Refer to
the Engine Workshop manual for oil capacities and additional engine specif cations. Replace the oil f lter with every oil change.
TEMPERATURE RANGE OIL WEIGHT
Above 77 °F (25 °C) SAE 30 or SAE 10W-30
32 °F to 77 °F (0 °C to 25 °C) SAE 20 or SAE 10W-30
Below 32 °F (0 °C) SAE 10W or SAE 10W-30
ENGINE OIL - DIESEL
Check the engine oil level when the machine is parked on a level surface and the engine is cool. Change the engine oil after the f rst 50 hours
of operation and every 200 hours after that. Use CF, CF-4 or CG-4 oil meeting API specif cations and suited temperatures (*important reference
the oil/fuel type note below for further diesel oil recommendations). Refer to the Engine Workshop manual for oil capacities and additional engine
specif cations. Replace the oil f lter with every oil change.
TEMPERATURE RANGE OIL WEIGHT
Above 77 °F (25 °C) SAE 30 or SAE 10W-30
32 °F to 77 °F (0 °C to 25 °C) SAE 20 or SAE 10W-30
Below 32 °F (0 °C) SAE 10W or SAE 10W-30
* Diesel Lubricating Oil Note:
With the emission control now in effect, the CF-4 and CG-4 lubricating oils have been developed for use with a low-sulfur fuel used in on-road
vehicle engines. When an off-road vehicle engine runs on a high-sulfur fuel, it is advisable to employ the CF, CD or CE lubricating oil with a
high total base number. If the CF-4 or CG-4 lubricating oil is used with a high-sulfur fuel, change the lubricating oil at shorter intervals.
• Lubricating oil recommended when a low-sulfur or high-sulfur fuel is employed.
Fuel
Lubricating
Oil class
Low sulfur
(0.5 % )
High sulfur Remarks
CF
OO
TBN 10
CF-4
OX
CG-4
OX
O : Recommended X : Not recommended
ENGINE BREAK-IN PERIOD – GASOLINE / PETROL, LP
During initial engine break-in period you may experience a slight smell or small amount of smoke coming from the engine.
ENGINE COOLANT
CAUTION!
Do not remove the radiator cap when the engine is hot.
To check the engine coolant level, unlatch the Engine Compartment Access Panel Latch (10) and remove the side panel, and observe the coolant
level in the Engine Coolant Reservoir (22). If the level is low add automotive type anti-freeze appropriately diluted for the environment. Clean the
radiator exterior by washing with low-pressure water or using compressed air every 30 hours.
revised 8/13

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nilfisk-Advance CS7010 and is the answer not in the manual?

Nilfisk-Advance CS7010 Specifications

General IconGeneral
BrandNilfisk-Advance
ModelCS7010
CategoryFloor Machine
LanguageEnglish

Related product manuals