2
IDENTIFICATIONS OF PARTS
ASSEMBLING THE VACUUM - CLEANER READY FOR USE
1. Connect the suction hose to the
suction tube.
2. Adjust the telescopic tube.
3. Connect the nozzle to the suction
tube.
4. Connect the body connector to the
body of the cleaner.
Features marked with
* may vary according to model.
HANDLE
AIR REGULATOR
TUBE
*
FLOOR NOZZLE
*
SMART PROTECTOR
RUG/FLOOR SELECTOR
CARRYING HANDLE
CLAMPER FOR DUST BAG
COMPARTMENT
ON/OFF BUTTON
POWER CONTROL
SWITCH
*
CORD REWIND BUTTON
DUST-FULL INDICATOR
TOOL STORAGE COVER
SUCTION HOSE
BUTTON FOR SUC-
TION HOSE REMOVAL
DJ68-00085P 1/16/02 11:52 AM Page 3
To Next Page
Loading...
