Nilfisk-Advance P 150.1-10 B User Manual

12
12
D
Service / Repair.
Dismounting / Mounting of Easy start valve.
Remove the easy seat with a small hook (fig.1) then remove the
o-ring underneath the seat ,with a small screwdriver .
Mounting : place the ball on the end of the spring (fig.2), be sure
the the ball are in the right position when mounting plug.
Regarding the mark on the seat,
See section ”Operation guide”
2.5 Handle release
Fig.1 Fig.2
Fig.1

Nilfisk-Advance P 150.1-10 B Specifications

General

Brand	Nilfisk-Advance
Model	P 150.1-10 B
Category	Pressure Washer
Language	English