Nilfisk-Advance SC351 Use And Maintenance

Nilfisk A/S
Kornmarksvej 1
DK-2605 Brøndby
Denmark
Tel.: +45 43 23 40 50
Fax: +45 43 43 77 00
mail.com@nilfisk.com
www.nilfisk.com
The machine
doesn’t work
as it should?
The suction
doesn’t work
as it should?
The machine
doesn’t clean
as it should?
The brush
don’t work as they
should?
Troubleshooting
- SC351
ATTENTION! Do not use the machine before you have read and understood the Instructions for use manual
1 Check if the fuse has triggered. 2 Check if there are external materials
avoiding brush rotating.
1 Check if the power cable is correctly
connected.
2 Check if the battery is charged. 3 Check if the fuse isn’t burnt out.
4 Check if the programs selector is
damaged or has the right function
selected.
1 Check if the suction hose is
correctly installed and cleaned.
2 Open the recovery tank and check
if the vacuum grid and gasket are
cleaned.
3 Check if squeegee blades are dam-
aged or dirty.
4 Check if the fuse isn’t burnt out.
1 Check if the programs selector has
the right function selected.
2 Check if the solution valve is dirty/
clogged.
3 Check if the solution reduction
fitting is dirty/clogged.
4 Check brush/pad condition

Nilfisk-Advance SC351 Specifications

General

Brand	Nilfisk-Advance
Model	SC351
Category	Floor Machine
Language	English