To Next PageTo Next Page
Need help?Do you have a question about the Nilfisk-Advance Advance SC500 X20 B and is the answer not in the manual?
General| Brand | Nilfisk-Advance |
|---|---|
| Model | Advance SC500 X20 B |
| Category | Floor Machine |
| Language | English |
General description, safety warnings, and instructions for safe operation.
Machine specifications, lifting/transporting guidelines, and maintenance schedule.
Overview of control panels, diagnostic equipment, and machine dimensions.
Functional description of control system components and their wiring.
Detailed guide for diagnosing and resolving control system alarms.
Navigating display screens, managing parameters, and operating time counters.
Procedures for component replacement and detailed connector/shop measurements.
Functional description of the smart key system and its wiring diagram.
Guide to resolving alarms and issues within the smart key control system.
Managing smart keys, display screens, parameters, and operating times.
Removal/installation, connector specs, and shop voltage measurements for the smart key system.
Identification of the primary structural components of the machine chassis.
Functional description of machine movement and the system's wiring diagram.
Diagnosing drive system faults and performing gear motor current draw tests.
Procedures for speed potentiometer replacement and system specifications.
Description of electrical system, battery status display, charging procedures, and installation.
Guide to checking/replacing fuses and general electrical troubleshooting.
Schematics and technical data for the electrical system, battery, and charger.
How the solution system dispenses fluid and the role of the water level sensor.
Diagnosing solution system issues and procedures for cleaning tanks and draining.
Procedures for replacing pumps, valves, sensors, and system specifications.
Description of disc brush operation, brush installation, and deck actuator functions.
Diagnosing brush issues and performing brush motor current draw tests.
Procedures for disassembling/assembling brush deck, motor, and actuator, plus specifications.
Description of REV brush operation, brush installation, and deck actuator functions.
Diagnosing REV brush issues and performing REV motor current draw tests.
Procedures for disassembling/assembling REV deck, motor, and actuator, plus specifications.
Overview of squeegee function, cleaning, and blade replacement procedures.
Diagnosing squeegee issues and replacing gas springs and related parts.
How the recovery system collects and stores dirty water and tank cleaning procedures.
Diagnosing vacuum motor issues and performing current draw tests.
Procedures for replacing vacuum motor, container, and system specifications.
Components included in various optional kits like EcoFlex, Battery Charger, USB, and Trackclean.
