EasyManua.ls Logo

Nilfisk-Advance SCRUBTEC 344 Series - User Manual

Nilfisk-Advance SCRUBTEC 344 Series
173 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SC401, SCRUBTEC 344
07/2018 (B) Form No. 9100002300
Service Manual
Advance Model Numbers:
9087394020 SC401 17 B
9087395020 SC401 17 BD
Nilsk Model Numbers:
9087391020 SC401 43 B
9087390020 SC401 43 B FULL PKG
9087392020 SC401 43 E
9087393020 SC401 43 BD
9087398020 SC401 43 BD FULL PKG
9087396020 SCRUBTEC 344 B COMBI
9087397020 SCRUBTEC 344 E
English

Table of Contents

Questions and Answers

  • S
    Scott MorrisonAug 9, 2025
    What to do if the vacuum system button LED is flashing on my Nilfisk-Advance Floor Machine?
    • G
      Gene PerryAug 9, 2025
      If the vacuum system button LED is flashing rapidly on your Nilfisk-Advance Floor Machine, it could be due to a few reasons. One possible cause is that the vacuum system motor current is exceeding the continuous current limit (default: 16 Amp) for longer than 30 seconds. You should check for any dust or debris that might be obstructing the vacuum system motor fan's rotation. Another reason could be related to exceeding the vacuum system motor peak current limit (default: 30 Amp). Additionally, try turning the machine off using the Main button.
  • M
    Mary GrayAug 26, 2025
    Why are 6 battery LEDs flashing on my Nilfisk-Advance SCRUBTEC 344 Floor Machine?
    • J
      Jennifer GarciaAug 26, 2025
      If the 6 battery LEDs are flashing on your Nilfisk-Advance Floor Machine, one potential cause is that the brush motor current is higher than the set continuous current limit (default: 25 Amp) for longer than the specified time (default: 30 seconds). To resolve this, check for any dust or debris that may be preventing the brush from rotating freely. Another possible reason might be that the brush motor peak current is exceeding the peak current limit (default: 40 Amp), or it could be due to a total current overload. In addition, you can try turning the machine off using the Main button.

Nilfisk-Advance SCRUBTEC 344 Series Specifications

General IconGeneral
ModelSCRUBTEC 344
CategoryFloor Machine
Scrubbing width43 cm
Voltage24 V
Battery Voltage24 V
Battery typeLead-acid
Noise Level68 dB(A)
Machine typeScrubber
TypeScrubber
Working Width430 mm

Related product manuals