Nilfisk-Advance SC500 How-To Guide



SC500 How To
Store the Machine (Daily Maintenance)
1
Empty and clean
recovery tank. Remove,
empty and clean debris
catch cage. Rinse and
clean ball float cage.
2
Remove, rinse and
inspect squeegee and
blades.
3
Remove and inspect
the brush or pad. Rinse
pad then set aside to
dry.
4
Lift up recovery tank lid
for ventilation. Charge
the batteries. Take a
clean damp cloth and
wipe down exterior of
machine.
Check battery fluid level
– refill as needed (wet
batteries only)
. Clean
solution filter. Purge
EcoFlex System by
pressing both the
solution and chemical
buttons.
2
For uneven wear
across the squeegee,
adjust the squeegee
pitch by turn the knob
until squeegee glides
evenly on the floor.
Annual Maintenance
1
Check motor carbon
brushes
(vacuum motor and
scrub deck motor)
. Refer to
operator manual for
instructions or an
Authorized Advance
Service Center for
carbon brush inspection
and replacement help
.
2
Inspect and replace scrub
deck brush vibration
dampers
(REV models)
Refer to operator manual
for instructions or an
Authorized Advance
Service Center for
carbon brush inspection
and replacement help.
3
Refer to the SC500
operator’s manual for
proper operation and
maintenance
instructions.

WeeklyMaintenance
www.totalwarehouse.com
833-868-2500
www.totalwarehouse.com
833-868-2500

Nilfisk-Advance SC500 Specifications

General

Brand	Nilfisk-Advance
Model	SC500
Category	Floor Machine
Language	English