Nilfisk-ALTO MC 4M Service Manual

F
SM MC 3C_ MC 4M Ver.1.0_March 2015
Service / Repair
59
Motor disasassembly
Pull off motor cover.
Motor bracket bolt slides in the special
channel made in the stator cooling ribs.
Remove lock ring from rotor shaft.
Pull off motor fan.
Remove the 4 stay bolts with a 10
mm box spanner
Loosen the N-bearing cover from the stator
with a screwdriver or similar. Pull off the N-
bearing cover.
MC 3C 4M

Nilfisk-ALTO MC 4M Specifications

General

Brand	Nilfisk-ALTO
Model	MC 4M
Category	Pressure Washer
Language	English