Nilfisk-ALTO NEPTUNE 8 User Manual

301002099 C
Operating instructions
NEPTUNE 5
NEPTUNE 7
NEPTUNE 8

Nilfisk-ALTO NEPTUNE 8 Specifications

General

Frequency	50 Hz
Flow Rate	8 l/min
Water flow Qmax/Qiec	8 l/min
Voltage/phase/frequency	50 Hz
Water Flow	8 l/min

Summary

Important Instructions

For Your Own Safety

Ensures only authorized persons use the cleaner and outlines safety precautions.

General Safety Guidelines

Adherence to local regulations, accident prevention and proper use.

Transporting the Cleaner

Guidelines for safe transportation of the machine, including securing it.

Pre-Operation Checks

Checks before starting the cleaner, including power cord and voltage.

Safe Operation Practices

Guidelines for safe operation, including extension cords and electrical safety.

Maintenance and Repair Procedures

Emphasizes using original parts and authorized service for maintenance.

Safety Testing Requirements

Details mandatory safety examinations and checks for the cleaner.

Unloader Valve Function

Describes the function of the unloader valve and its factory settings.

Product Description

Purpose of the High-Pressure Cleaner

Outlines the intended professional uses of the high-pressure cleaner.

Operating Elements Overview

Lists and describes the various parts and controls of the cleaner.

Before Starting the Cleaner

Transport and Assembly Instructions

Steps for lifting, assembling and preparing the machine for use.

Setting the Parking Brake

Instructions on how to apply the brake for stability.

Crank Handle Installation

Procedure for installing the crank handle for hose reels.

Filling Detergent Tanks

Guidance on how to fill the detergent tanks (A) and (B).

Filling Anti-Scale Indicator Tank

Instructions for filling the tank with Nilfisk-Alto AntiStone.

Adjusting Anti-Scale Device

Steps to adjust the AntiStone device based on water hardness.

Fueling the Cleaner

Information on correct fuel types and filling the fuel tank.

Connecting the High-Pressure Hose

Procedure for connecting the high-pressure hose to the machine.

Hose Reel Connection Details

Specific connection steps for models with a high-pressure hose reel.

Non-Hose Reel Connection Details

Specific connection steps for models without a hose reel.

Water Supply Connection

Requirements and steps for connecting the water supply hose.

Electrical Connection Safety

Critical safety information for connecting the cleaner to the power supply.

Antifreeze Procedure

Steps for flushing the machine with antifreeze before first use.

Control and Operation

Connecting Spray Lance to Gun

Procedure for attaching the spray lance to the spray gun.

Spray Gun Connection Steps

Detailed steps for securely connecting the spray lance to the gun.

Switching On and Cold/Hot Water Operation

Instructions for starting the cleaner in cold and hot water modes.

Steam Operation Mode

Procedure for operating the cleaner in steam mode (over 100°C).

Pressure Adjustment - Tornado Lance

How to regulate pressure using the Tornado Lance.

Pressure Adjustment - VarioPress Gun

How to regulate pressure using the VarioPress Gun.

Using Cleaning Agents and Detergents

Guidance on selecting and applying cleaning agents.

Applications and Methods

General Cleaning Techniques

Guidelines for achieving efficient high-pressure cleaning.

Soaking for Dirt Loosening

Method for loosening dirt by soaking surfaces.

Detergent and Foam Application

Techniques for applying detergents and foam for effective cleaning.

Detergent Effectiveness by Temperature

How temperature affects detergent performance on different types of dirt.

Mechanical Effect for Tough Dirt

Using accessories like brushes for enhanced cleaning power.

Water Flow vs. High Pressure

Balancing water flow and pressure for optimal cleaning results.

Typical Cleaning Task Examples

Examples of common cleaning tasks and recommended methods.

Agricultural Cleaning Tasks

Specific cleaning methods for agricultural environments.

Vehicle Cleaning Tasks

Recommended procedures for cleaning vehicles.

Building and Equipment Cleaning

Methods for cleaning general surfaces and metallic equipment.

After Using the Cleaner

Switching Off the Machine

Steps to safely turn off the cleaner after operation.

Disconnecting Water and Power Lines

Procedure for safely disconnecting supply lines.

Storing Power Cord and Accessories

Instructions for safely rolling up the power cord and storing accessories.

Storing Cleaner in Freezing Conditions

Detailed steps for protecting the cleaner from frost damage.

Maintenance Procedures

Scheduled Maintenance Tasks

Overview of maintenance tasks based on usage intervals.

Detailed Maintenance Steps

Specific instructions for carrying out maintenance work.

Water Filter Maintenance

Procedure for cleaning and maintaining water filters.

Oil Filter Maintenance

Procedure for cleaning or replacing the oil filter.

Pump Oil Quality Check

How to check the quality and level of pump oil.

Pump Oil Change Procedure

Step-by-step guide for changing the pump oil.

Draining the Fuel Oil Tank

Instructions for safely draining the fuel oil tank.

Flame Sensor Cleaning

Procedure for cleaning the flame sensor.

Troubleshooting Guide

Display Error Indications and Remedies

Lists display error codes, their causes, and corrective actions.

Control Panel Light Indicators

Explains indicator lights, their meanings, causes, and remedies.

Common Faults and Solutions

Addresses other common issues like pressure, noise, and detergent draw.

Further Information

Cleaner Recycling and Disposal

Environmental guidelines for disposing of the used cleaner.

Product Guarantee Conditions

Details on warranty coverage and conditions for invalidation.

EU Declaration of Conformity

Statement confirming the product's compliance with relevant EU regulations.

Technical Data