6
4 Operating your pressure washer
4.1 Mounting of spray
lance
1. Push the spray lance (3) into
the spray gun (5).
3. Turn on the water.
4.3 Telescopic handle
The machine features a tele-
scopic handle. To raise or lower
the handle, press the knob (13)
and move the handle upwards
or downwards. When a click
is heard, the handle is in right
position.
4.2 Water connection lations.
IMPORTANT! Only use wa-
ter without any impurities. If
there is a risk of running sands
in the inlet water (i.e. from your
own well), an additional fi lter
should be mounted.
1. Let the water run through the
water hose before connecting
it to the machine to prevent
sand and dirt from penetrat-
ing the machine.
Note: Check
that the fi lter is
fi tted in the water
inlet pipe and that it is not
clogged up.
2. Connect the water hose to
the water supply by means
of the quick connector (inlet
water, max. pressure: 10 bar,
max. temperature: 50°C).
An ordinary 1/2" garden hose of
min. 10 m and max. 25 m will
be suitable.
NOTE: Connection
to the public mains
according to regu-
To Next Page
Loading...
Need help?
General
