2) Infrared receiver for remote
3) LED battery charge indicator
5) 2” screen
6) Setup key
7) Microphone
cyclically to switch between
video, car-carrying, photo and
playback modes.
9) Shutter key/OK key
12) MicroSD card slot
13) USB
14) Micro HDMI
OPERATING INSTRUCTIONS
CHARGE
Turn on the video camera and check battery status; if low, charge it.
Either a computer USB port of power adapter (not included) can be used to charge it.
Generally, it takes 2-4 hours to complete the charge cycle.
INSERTING AND REMOVING THE MEMORY CARD
RELOADED video camera supports TF memory
cards with capacity up to 32 GB.
Any type of Micro SD card can be used but we recommend
high speed cards to optimise performance.
1. Make sure the video camera is off.
2. Insert the card in its slot, being careful that it is inserted in the correct direction until a click is
heard.
• Removal.
Turn off the video camera.
2 Press the centre of the back of the card and release it; then remove it.