Nilox MINI Wi-Fi 2 - BATTERY; Charging the battery

Charging the battery
To charge the battery
1. Connect the camera to a computer or USB power supply with the USB cable included.
2. The charging status light remains ON while the battery is charging.
3. The charging status light will turn OFF when the battery is fully charged.
* 2 Batteries included 3.7V 900 mAh
*Charging time: 3.5 hours
*Please make sure the camera is shut down while charging.
*Charge only with 5V 1A output charger.
*Remove the battery before using as a dash camera.
*Do not store at a temperature above 140°F/60°C.
*Do not disassemble, crush, damage or dispose of in fire.
*Do not use swelling battery.
*Stop using the battery after immersion in water.
*Do not dispose of the camera or its battery in the rubbish. Please find a specific recycling
point for it.
11
EN
BATTERY