Need help?Do you have a question about the Nimbus Water Systems Five Water Maker WM5-50 and is the answer not in the manual?
States warranty conditions, exclusions, and limitations for proper system use.
Manufacturer is not liable for indirect losses or damages resulting from system failure.
Outlines owner's duties, including regular maintenance and reporting defects.
Details the duration of implied warranties like merchantability and fitness for purpose.
Details production rates, TDS rejection, recovery, and brine to product ratios.
Specifies required water pressure, temperature, TDS, chlorine, turbidity, SDI, and pH levels.
Provides the physical dimensions and weight of the system and its shipping box.
Step-by-step instructions for installing the faucet and its components.
Details on connecting the water supply and the drain line for system operation.
Procedures for checking connections, ensuring proper component seating, and initial leak checks.
Steps to flush the system and tank to remove sanitizers and carbon fines before use.
Detailed steps for removing and installing new filter cartridges.
Instructions for replacing the inline post-filter connected to the faucet line.
General| Model | WM5-50 |
|---|---|
| Category | Water Filtration Systems |
| Manufacturer | Nimbus Water Systems |
| Stages | 5 |
| Operating Pressure | 40-80 psi |
| Membrane Type | Thin Film Composite (TFC) |
| Pre-Filtration | Sediment and Carbon Filters |
| Post-Filtration | Carbon Filter |
| Type | Reverse Osmosis |
| Production Capacity | 50 gallons per day (GPD) |
To Next Page
