11
beep,and the brightness will decrease slightly until the minimum brightness is
achived.
4.Heater Button-To activate the heater,press the heater button (see F),then
press HI(G).MED(H),or LO(I).The heater is preset to the following temperatures:
.HIGH will shut off when room reaches approximately 28℃
.MED will shut off when room reaches approximately 22℃
.LO(Low)will shut off when room reaches approximately 16℃
5.Flame Button-Press the Flame Adjusting Buttons to achieve medium flame
intensity.(see J& K).
6.To Increase Flame Brightness press and release the(K) button.Each time you
press this button you will hear a beep and the brighrness of the flame will
increase slightly,until the maximum setting is reached.To Decrease Flame
Brightness press and relesae the(J)button.Each time you press this button you
will hear a beep and the brightness of the flame will decrease slightly,until the
minimum setting is reached.
To Next Page
Loading...