What to do if my Ninja BL450C unit doesn’t turn on?
Ensure the unit is plugged into a working outlet. To activate, rotate and press down on the cup. Also, verify that the blade assembly is correctly attached to the cup and properly aligned.
What to do if my Ninja Blender cup is leaking?
Ensure the lid or blade assembly is correctly attached to the cup. Leaking can happen if it’s misaligned when twisted on. Turn the lid tightly clockwise to secure it.
How to improve mixing performance of my Ninja BL450C Blender?
For optimal mixing, pulse the ingredients. Press down on the cup in short intervals for even blending and chopping. When blending frozen ingredients, pulse in short bursts of 2-5 seconds, and then repeat as needed.
Why is food from my Ninja BL450C too finely chopped or watery?
The food is likely over-processed. Use short pulses for optimal results. Press down on the cup in short intervals to avoid over-processing.
What to do if my Ninja BL450C Blender doesn’t turn off?
Unplug the power cord from the electrical outlet and call customer service for support.
How to align the lid/blade assembly on my Ninja Blender cup?
Place the cup on a level surface. Position the lid or blade assembly on top, aligning the threads so they sit flat on the cup. Twist clockwise until you achieve a tight seal, ensuring even alignment.
Why is food unevenly chopped in my Ninja BL450C Blender?
You might be chopping too much food at once, or not pulsing properly. Try reducing the amount of food in the cup for more even results.
To Next Page
General