EasyManuals Logo
Home>Ninja>Blender>BL492 series

Ninja BL492 series User Manual

Ninja BL492 series
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14
®
www.sharkninja manuals.com
Unit doesn’t turn on:
• Make sure the unit is plugged in and the START/STOP button is pressed.
•Insertandrotatecupclockwiseinthebaseuntilitclicksintoplace.Displayshouldturnon.
Unit doesn’t turn off:
•Remove cup from base by rotating cup anticlockwise and lifting out. Display should turn off. Unplug the power cord from the outlet.
Lid/blade assembly hard to assemble:
•Set the cup on a level surface. Place the lid or blade assembly on the top of the cup and align the threads so that the lid/blades sit flat on the cup. Twist clockwise so
that the lid/blades evenly align to the cup until you have a tight seal.
Food is not evenly chopped:
•For best results when chopping, make sure all ingredients are as dry as possible. Cut pieces down to even sizes, and reduce the amount of food in the cup. Use the
Auto-iQ
®
CHOP button for best results.
Doesn’t mix well, food gets stuck:
•Using the Auto-iQ programs is the easiest way to achieve great results. The pulses and pauses allow the food to settle towards the blade. If food is routinely getting
stuck adding some liquid will usually help.
•Whenpackingthecups,startwithfreshitems,thenaddliquids,powders/dryingredients,andnallyfrozenitemsorice.
Unit moves on the counter while blending:
•Makesurethesurfaceaswellasthefeetoftheunitarecleananddry.
Unit is difficult to remove from the counter for storage:
•Toreleasethemotorbasefromthecounterortabletop,placeyourhandsunderneathbothsidesofthemotorbaseandgentlypulltheunitupandtowardsyou.
PIZZA DOUGH
•7g packetactivedryyeast
•½tsp sugar
•150ml warmwater40.5-4C(105-110°F)
•470g plainour
•1 3tsp salt
•60ml oliveoil
•reservedour
•reservedwater
DIRECTIONS
1. Combine the yeast, sugar, and warm water in a small bowl and set aside until foamy, about 5 minutes.
2. Place the dough blade attachment into the Processor Bowl and add the flour, salt, olive oil, and the yeast mixture. Blend for 30 seconds until dough comes
together. Remove the dough, form a ball, and place into a lightly oiled bowl. Cover loosely with plastic wrap and allow to rest and rise for 1 hour, until dough is
doubled in size.
TROUBLE-
SHOOTING
GUIDE
SUGGESTED
RECIPE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ninja BL492 series and is the answer not in the manual?

Ninja BL492 series Specifications

General IconGeneral
BrandNinja
ModelBL492 series
CategoryBlender
LanguageEnglish

Related product manuals