10
www.ninjakitchen.com
USING THE 4-BLADE ASSEMBLY
1 Place the motor base on a clean, dry, level surface such
as a counter or table top.
2 Secure the bowl onto the motor base.
3 Holding the 4-Blade assembly by the shaft, place it
onto the gear shaft inside the bowl. Ensure that the
attachment fits around the gear shaft and that it is
standing straight. (Fig. 1)
4 Add the ingredients and secure the bowl lid onto the
bowl. (Fig. 1)
5 Plug the power cord into the electrical outlet and press
on the power button (
). (Fig. 2) Select the speed
that best suits your needs. Pulse ingredients for even
chopping by pressing down in short intervals.
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
6 When you have reached your desired consistencey, stop
the appliance by pressing the power button (
) and
wait for the blade to stop turning.
7 To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle. (Fig. 2)
8 Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
CAUTION: If pouring from the bowl, ALWAYS
remove the blade assembly first before pouring.
9 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you. (Fig. 4)
USING THE DOUGH BLADE
IMPORTANT: Use only the “DOUGH” button when
using this attachment.
1 Place the motor base on a clean, dry, level surface such
as a counter or table top.
2 Secure the bowl onto the motor base.
3 Holding the dough blade by the shaft, place it onto the
gear shaft inside the bowl. Ensure that the attachment
fits around the gear shaft and that it is standing
straight. (Fig. 5)
4 Add the ingredients and secure the bowl lid onto the
bowl. (Fig. 5)
NOTE: For best results add wet ingredients first and
then add dry ingredients.
5 Plug the power cord into the electrical outlet and press
on the power button (
). (Fig. 2)
6 To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle. (Fig. 2)
7 Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
8 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you. (Fig. 4)
WARNING: Never leave the appliance unattended while in use.
CAUTION: Handle the blade assemblies with care, as the blades are very sharp.
REMOVAL
USE
Fig. 5
USE
Fig. 1 Fig. 2 Fig. 3 Fig. 4