Ninja BL773CO Mega Kitchen System - Assembly and Use for the Nutri Ninja Cup

7
TOLL FREE: 1-877-646-5288
Use caution when handling the blade
assemblies.
IMPORTANT: Make sure that the motor base is
plugged in for use.
1 Place the motor base on a clean, dry, level surface
such as a counter or table top.
2 Add ingredients to the Nutri Ninja
®
cup.
3 Place the Nutri Ninja
®
blade onto the cup and screw it
tightly until you have a good seal. (Fig. 1)
4 Turn the Nutri Ninja
®
cup upside down and place it onto
the motor base, aligning the tabs on the cup with the
motor base. Turn the Nutri Ninja
®
cup clockwise until
you hear a click. (Fig. 2) Turn the power button on, the
Nutri Ninja
®
button will illuminate.
5 Press down on the Nutri Ninja
®
button in short intervals
to activate. (Fig. 3)
Fig. 1 Fig. 2
Assembly and Use for the Nutri Ninja
®
Cup
Fig. 3 Fig. 4 Fig. 5
ASSEMBLY PULSE
REMOVAL
6 Once you have reached your desired consistency,
turn the power button off. Turn the Nutri Ninja
®
cup
counterclockwise and pull straight up to remove.
(Fig. 4) (Fig. 5)
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the “Max” fill line.
7 Turn the cup upright and remove the Nutri Ninja
®
blade
by twisting the blade assembly counterclockwise.
8 Place the To-Go lid onto the Nutri Ninja
®
cup, twist
clockwise to seal and enjoy!
9 Make sure that the motor base is unplugged when not
in use.
NOTE: To order additional Nutri Ninja
®
Cups, please visit
our website: www.ninjakitchen.com or feel free to contact
customer service: 1-877-646-5288.
For best results, use short “PULSES”... Practice makes perfect!!
WARNING: Never leave the appliance unattended while in use.