Ninja BL642 - User Manual

Other manuals for Ninja BL642

Questions and Answers

J
Jorge FinleyAug 19, 2025
What to do if my Ninja BL642 Blender motor doesn’t start?
- T
  Timothy SnyderSep 12, 2025
  If your Ninja Blender motor isn’t starting, several factors could be at play. First, ensure the container and lid are securely in place and properly aligned. Next, verify that the blender is turned 'On' by pressing the power button and that the plug is firmly inserted into the electrical outlet. Also, check the fuse or circuit breaker. If the unit has overloaded or overheated, unplug it and wait approximately 15 minutes before attempting to use it again. Finally, ensure that the unit is not overloaded.
R
Rebecca CooperAug 21, 2025
What does a blinking red light mean on my Ninja BL642 Blender?
- K
  Kelly FarmerAug 21, 2025
  A blinking red light on your Ninja Blender indicates that the unit is not installed properly. For your safety, the unit can only be turned on when it is correctly assembled.
D
Dale AshleyAug 23, 2025
Why is there a blinking red light on my Ninja BL642?
- S
  Sean HornAug 23, 2025
  If you have a blinking red light on your Ninja Blender, it indicates that the unit is not installed properly. For your safety, the unit can only be turned on when it is correctly assembled. Please refer to the assembly pages of this inspiration guide for assistance.
R
Rebecca LopezAug 26, 2025
How to evenly chop food in my Ninja BL642?
- T
  Todd AlvarezAug 26, 2025
  If food is unevenly chopped in your Ninja Blender, you might be chopping too much food at once, or the pieces aren't evenly sized. Try processing smaller amounts per batch.
R
robertcainAug 27, 2025
How to make snow from ice in Ninja Blender?
- J
  Julie Carey DVMAug 28, 2025
  If you cannot achieve snow from solid ice in your Ninja Blender, avoid using ice that has been sitting out or has started to melt; use ice straight from the freezer. Start with a few pulses and then switch to a continuous blending cycle.
A
angela56Aug 30, 2025
Why does my Ninja BL642 Blender show an 'Err' message?
- K
  Kim OrtegaAug 30, 2025
  Your Ninja Blender shows an 'Err' message because it can detect which jar is on the base. You may be trying to use a program that isn't designed for the installed jar. The programs will light up, indicating which ones are available for each jar.
C
Christopher MaldonadoSep 1, 2025
How to make my Ninja Blender motor base stick to the counter?
- R
  Rachel BeardSep 1, 2025
  To ensure your Ninja Blender motor base sticks to the counter, wipe the surface and suction feet clean. Note that suction feet only adhere to smooth surfaces and will not stick to wood, tile, or non-polished finishes. Do not use the appliance if the motor base is stuck to an unsecured surface like a cutting board.
A
Anna MooreSep 3, 2025
Why is food unevenly chopped in my Ninja BL642?
- K
  kkingSep 3, 2025
  Food may be unevenly chopped in your Ninja Blender because you are either processing too much food at once, or the pieces aren't uniformly sized. Try processing smaller amounts per batch.
C
copelandpamelaSep 5, 2025
What to do if food is too watery in Ninja BL642?
- P
  Pam StricklandSep 5, 2025
  If food is too watery in your Ninja Blender, it has likely been over-processed. Try using the AUTO-iQ™ Pulse button for more controlled processing.
N
Nicholas BakerSep 7, 2025
Why can't I get snow from ice in my Ninja BL642 Blender?
- B
  Brian Green PhDSep 7, 2025
  If you're unable to achieve a snow-like consistency from solid ice in your Ninja Blender, avoid using ice that has been sitting out or has started to melt. Use ice straight from the freezer. Start with a few pulses, then switch to a continuous blending cycle.

Ninja BL642 Specifications

General

Technology	Total Crushing Technology
Dishwasher Safe	Yes
Pulse	Yes
Ice Crushing	Yes
BPA Free	Yes
Dimensions	7.5 x 9.5 x 17.5 inches
Capacity	72 oz (64 oz max liquid)
Blades	Stainless Steel
Speeds	3