Ninja BL682

Questions and Answers:

D
Deborah PriceJul 26, 2025
What to do if my Ninja BL682 Blender motor doesn’t start?
- L
  Laurie KelleyJul 27, 2025
  If the motor of your Ninja blender doesn't start, make sure the container and the lid are securely placed and aligned on the motor base. Ensure the appliance is turned 'On' by pressing the power button and that the plug is securely inserted into the electrical outlet. Check the fuse or circuit breaker. If the unit has overloaded or overheated, unplug it and wait approximately 15 minutes before using it again. Also, ensure the unit is not overloaded.
A
Amy BennettJul 31, 2025
How to make snow from ice in Ninja Blender?
- D
  David ParkerJul 31, 2025
  To achieve a snow-like consistency from solid ice in your Ninja blender, do not use ice that has been sitting out or has started to melt; use ice straight from the freezer. Start with a few pulses and then switch to a continuous blending cycle.
T
Timothy WilsonAug 4, 2025
Why is my Ninja BL682 Blender motor base not sticking to the counter?
- S
  Stephanie LopezAug 4, 2025
  If your Ninja blender's motor base won't stick to the counter, make sure the surface and suction feet are wiped clean. Note that the suction feet will only stick to smooth surfaces and will not adhere to surfaces like wood, tile, or non-polished finishes. Do not attempt to use the appliance when the motor base is stuck to an insecure surface.
R
Robert NealAug 8, 2025
What to do if my Ninja BL682 food is unevenly chopped?
- T
  Todd WilsonAug 8, 2025
  If food is unevenly chopped in your Ninja blender, it could be due to chopping too much food at once, or the pieces are not of even size. Try processing smaller amounts per batch.
H
Hannah HamiltonAug 12, 2025
What to do if food collects on the lid of my Ninja BL682?
- D
  David PriceAug 12, 2025
  If food collects on the lid or sides of the container in your Ninja blender, the mixture might be too thick. Try adding more liquid to the mixture.
C
Corey OlsonAug 17, 2025
Why is my Ninja Blender food chopped too fine?
- S
  Steven TaylorAug 17, 2025
  If the food is chopped too fine or is too watery in your Ninja blender, it has likely been over-processed. Use the Auto-iQ™ Pulse button for controlled processing.
D
danielhenryAug 21, 2025
What does the 'Err' message mean on my Ninja BL682 Blender?
- D
  davidcarterAug 22, 2025
  Your Ninja blender can detect which jar is on the base. The “Err” message means you may be trying to use a program that isn't designed for the jar you have installed. The programs will light up indicating which programs are available for each jar.

Ninja BL682 Specifications

General

Power	1500 Watts
Technology	Total Crushing Technology
Material	Plastic
Speeds	3
Pulse	Yes
Ice Crushing	Yes
Dishwasher Safe Parts	Yes
Blade Material	Stainless Steel
Voltage	120V
Capacity	72 oz
Blades	Pro Extractor Blades
Programs	Auto-iQ Programs
Warranty	1 year