What does a blinking red light mean on my Ninja BL642 Blender?
A blinking red light on your Ninja Blender indicates that the unit is not installed properly. For your safety, the unit can only be turned on when it is correctly assembled.
Why is there a blinking red light on my Ninja BL642?
If you have a blinking red light on your Ninja Blender, it indicates that the unit is not installed properly. For your safety, the unit can only be turned on when it is correctly assembled. Please refer to the assembly pages of this inspiration guide for assistance.
How to evenly chop food in my Ninja BL642?
If food is unevenly chopped in your Ninja Blender, you might be chopping too much food at once, or the pieces aren't evenly sized. Try processing smaller amounts per batch.
How to make snow from ice in Ninja Blender?
If you cannot achieve snow from solid ice in your Ninja Blender, avoid using ice that has been sitting out or has started to melt; use ice straight from the freezer. Start with a few pulses and then switch to a continuous blending cycle.
Why does my Ninja BL642 Blender show an 'Err' message?
Your Ninja Blender shows an 'Err' message because it can detect which jar is on the base. You may be trying to use a program that isn't designed for the installed jar. The programs will light up, indicating which ones are available for each jar.
How to make my Ninja Blender motor base stick to the counter?
To ensure your Ninja Blender motor base sticks to the counter, wipe the surface and suction feet clean. Note that suction feet only adhere to smooth surfaces and will not stick to wood, tile, or non-polished finishes. Do not use the appliance if the motor base is stuck to an unsecured surface like a cutting board.
Why is food unevenly chopped in my Ninja BL642?
Food may be unevenly chopped in your Ninja Blender because you are either processing too much food at once, or the pieces aren't uniformly sized. Try processing smaller amounts per batch.
What to do if food is too watery in Ninja BL642?
If food is too watery in your Ninja Blender, it has likely been over-processed. Try using the AUTO-iQ™ Pulse button for more controlled processing.
Why can't I get snow from ice in my Ninja BL642 Blender?
If you're unable to achieve a snow-like consistency from solid ice in your Ninja Blender, avoid using ice that has been sitting out or has started to melt. Use ice straight from the freezer. Start with a few pulses, then switch to a continuous blending cycle.
Why does food collect on the lid of my Ninja Blender?
If food collects on the lid or sides of the container in your Ninja Blender, the mixture might be too thick. Try adding more liquid to the mixture.
General| Technology | Total Crushing Technology |
|---|---|
| Dishwasher Safe | Yes |
| Pulse | Yes |
| Ice Crushing | Yes |
| BPA Free | Yes |
| Dimensions | 7.5 x 9.5 x 17.5 inches |
| Capacity | 72 oz (64 oz max liquid) |
| Blades | Stainless Steel |
| Speeds | 3 |
To Next Page
