Ninja BLAST BC100 Series - User Manual

ninjakitchen.com
BLAST™ PORTABLE BLENDER
BC100/BC150 Series | Owner’s Guide
1 Read all instructions prior to using the appliance and its accessories.
2 Carefully observe and follow all warnings and instructions. This unit contains electrical connections and moving parts that potentially present
risk to the user.
3 ALWAYS exercise care when handling the BlastBlade™ Assembly. The blades are sharp, handle carefully. ONLY grasp the BlastBlade™ Assembly
by the motor base. Failure to use care when handling the BlastBlade™ Assembly will result in a risk of laceration.
4 Take your time and exercise care during unpacking and appliance setup. This appliance contains sharp, loose blades that can cause injury
if mishandled.
5 Take inventory of all contents to ensure you have all parts needed to properly and safely operate your appliance.
6 DO NOT blend hot liquids or carbonated liquids, as doing so may cause pressure buildup, resulting in risk of burns or other injuries to the user.
7 DO NOT fill the blending vessel past the MAX FILL line.
8 Blades are sharp. Handle carefully.
9 Before use, wash all parts that may contact food. Follow washing instructions covered in this Owner's Guide.
10 To protect against the risk of fire from battery damage, DO NOT submerge the motor base in any form of liquid.
11 DO NOT store outdoors or allow the product to be submerged in liquid.
12 DO NOT allow children to operate this appliance or use as a toy. Close supervision is necessary when any appliance is used near children.
13 This appliance is NOT intended to be used by people with reduced physical, sensory, or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
14 Before each use, inspect BlastBlade™ Assembly for damage. If a blade is bent or damage is suspected, contact SharkNinja to arrange
for replacement.
WARNING: To reduce the risk of injury, fire, electrical shock or property damage, basic safety precautions must always be followed,
including the following numbered warnings and subsequent instructions. Do not use appliance for other than intended use.
WARNING: Handle the BlastBlade™ Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the blending vessel to be damaged or to shatter, which may
cause personal injury.
WARNING: DO NOT blend hot, eervescent, or carbonated liquids. Doing so may cause excessive pressure buildup, resulting in risk
of laceration and/or the user being burned.
WARNING: DO NOT put your hands inside the vessel or anywhere near the BlastBlade™ Assembly. Blades can still activate when the
sip lid is removed.
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ ALL INSTRUCTIONS BEFORE USE • FOR HOUSEHOLD USE ONLY
Read and review instructions for operation and use.
Indicates the presence of a hazard that can cause personal injury, death or substantial property damage if
the warning included with this symbol is ignored.
For household use only.
Indicates location to attach USB-C cord for charging unit.
When using electrical appliances, basic safety precautions should always be followed, including the following:

Summary

Important Safety Instructions

General Safety Precautions

Covers essential warnings regarding injury, fire, shock, and proper use of the appliance.

Handling and Usage Guidelines

Instructions for careful handling of parts, unpacking, and basic operation to prevent injury.

Maintenance and Storage Safety

Guidance on cleaning, submerging the unit, and inspecting parts for damage before use.

Charging the Blender

Charging Instructions

Details on how to charge the unit using the USB-C cord and required power supply.

Before First Use

Initial Setup and Cleaning

Guidance on unpacking, handling the sharp blades, and washing parts before initial operation.

Using the Control Panel

Programs and Buttons

Explanation of the Start/Stop and Power buttons for operating the blender's functions.

Troubleshooting Guide

Information on LED indicators and solutions for common operational issues.

Blending Vessel Operation

Steps for properly assembling the vessel and adding ingredients for blending.

Care & Maintenance

Cleaning Instructions

Procedures for hand-washing parts and safely cleaning the motor base.

Deeper Clean (Dishwasher)

Guidelines for cleaning the vessel and sip lid using a dishwasher.

Storage Guidelines

Recommendations for storing the blender unit and its components.

Troubleshooting Guide

Operational Checks

Resolving issues with the control panel not turning off or ingredients getting stuck.

Assembly Adjustments

Tips for resolving difficulties in assembling the sip lid or vessel.

Product Registration

Registering Your Product

Instructions on how to register your Ninja product online for safety notifications.

FCC Warnings

FCC Compliance Statement

Statement regarding device compliance with FCC rules and interference.

One (1) Year Limited Warranty

Warranty Coverage Details

Specifies what is covered and what is excluded under the limited warranty.

Service and Claims

Instructions on how to obtain service, make a warranty claim, and contact customer support.

State Law Application

Information on how state laws affect consumer rights regarding the warranty.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The Ninja Blast™ Portable Blender (BC100/BC150 Series) is a compact, battery-powered personal blender designed for on-the-go use. Its primary function is to blend ingredients for smoothies, shakes, and other beverages. The device is powered by a lithium-ion battery, making it cordless and suitable for use without a direct power outlet.

Function Description:

The Ninja Blast™ Portable Blender is engineered for convenient, single-serve blending. It features a "BlastBlade™ Assembly" integrated into the motor base, which is responsible for processing ingredients. The blender operates with a simple Start/Stop button that activates a 30-second blend cycle. It is designed to handle a variety of ingredients, including liquids, fresh fruits, vegetables, leafy greens, seeds, powders, nut butters, and ice. The blending vessel has a MAX FILL line to prevent overfilling and ensure optimal blending performance. The sip lid allows for direct consumption from the blending vessel, enhancing its portability. The device is intended for household use only and is not suitable for commercial purposes, grinding operations, or blending hot, effervescent, or carbonated liquids, which could cause pressure buildup and potential injury.

Important Technical Specifications:

• Voltage: 5V
• Power Source: Lithium-ion battery
• Charging: USB-C charging cord (5V 3A power supply recommended)
• Blend Cycle: 30 seconds (activated by Start/Stop button)
• Safety Features:
  • Thermal switch for overheat protection (disables motor for 15 minutes to cool down).
  • Interlock mechanism requiring proper vessel and sip lid installation for operation.
  • Warnings against blending hot/carbonated liquids due to pressure buildup.
  • Warnings against submerging the motor base in liquid to protect the battery.
  • Warnings against operating with an empty container.
  • Warnings against putting hands inside the vessel near the BlastBlade™ Assembly.
  • Warnings against storing ingredients for extended periods in the sealed vessel due to potential gas expansion.

Usage Features:

• Portability: Cordless design with a carry handle on the sip lid, making it easy to transport.
• Ease of Use: Simple one-button operation for blending. The unit turns ON/OFF via a separate Power Button.
• Ingredient Loading: Users are instructed to add liquids first, followed by solid ingredients, and ice last, ensuring ingredients do not exceed the MAX FILL line.
• Direct Consumption: The sip lid allows users to drink directly from the blending vessel.
• Troubleshooting LEDs: The unit features LED indicators to communicate various statuses:
  • Flashing WHITE: Vessel and base not aligned.
  • Flashing ORANGE: Blades are blocked, or unit needs charge.
  • Solid RED: Unit needs charge.
  • Flashing RED and BLUE: Abnormal charger detected.
  • Clockwise-moving ORANGE LEDs: Unit is in cool-down mode after overheating.
  • Flashing WHITE and RED: Indicates an issue requiring customer service.
  • Flashing RED (bottom left and top right): Indicates an issue requiring customer service.
• Overheat Protection: If the appliance overheats, a thermal switch will activate, temporarily disabling the motor. The unit requires approximately 15 minutes to cool down before it can be used again.
• Charging: The USB-C charging port is located at the back of the motor base. LEDs illuminate green when fully charged. It is recommended to charge the unit for at least 2 hours for a full battery.

Maintenance Features:

• Cleaning:
  • Hand-Washing: The vessel, lid, and BlastBlade™ Assembly should be washed with warm, soapy water using a dishwashing utensil or cloth to avoid direct contact with the sharp blades. The motor base should be wiped with a clean, damp cloth and NOT submerged in water.
  • Dishwasher Safe Parts: The vessel and sip lid are top-rack dishwasher safe. A heated dry cycle should NOT be used.
  • Motor Base: The USB-C port and motor base are water-resistant and can be rinsed in the sink, but should NOT be placed in a dishwasher or submerged in water.
• Storage: The unit should be stored upright with the lid, vessel, and motor base fully assembled. Blended or unblended ingredients should NOT be stored in the vessel with the BlastBlade™ Assembly for prolonged periods. Items should not be stacked on top of the vessel.
• Blade Care: The BlastBlade™ Assembly contains sharp blades and should be handled with extreme care, always grasping it by the motor base. Users are warned against attempting to sharpen the blades. Regular inspection for damage to the BlastBlade™ Assembly is recommended, and if a blade is bent or damaged, SharkNinja should be contacted for replacement.
• Battery Care: The lithium-ion battery should be kept away from metal objects to prevent shorting, which could cause fire or burns. In case of liquid ejection from the battery, avoid contact and flush with water; seek medical help if liquid contacts eyes. The product should not be incinerated.
• Product Registration: Users are encouraged to register their product online at registeryourninja.com to receive product safety notifications and facilitate warranty claims.
• Warranty: The product comes with a One (1) Year Limited Warranty covering defects in material and workmanship under normal household conditions. Wearable parts (like blending vessels, lids, blades) are not covered under this warranty but are available for purchase.

Ninja BLAST BC100 Series Specifications