Ninja FOODI POWER PITCHER SYSTEM User Manual

1.
Fill container with desired
contents. Screw on the
blade assembly until you
have a tight seal.
IF USING POWER
NUTRI CUP,
SKIP STEP 2.
1.
Use the dial to select
an Auto-iQ® program
or manual speed, then
press START/STOP to
begin blending.
2.
Flip container upside
down and install on base.
Rotate clockwise until it
clicks into place.
3.
When blending is
complete, remove the
container from base.
Then, remove the blade
assembly from container.
1.
Add milk, or milk alternative such
as soy, coconut, almond, or oat
milk, up to the LIQUID FILL line.
4.
Screw on the blade assembly and
install the bowl on the motor base.
Select BOWL and press
START/STOP. Twist the Power
Paddle counterclockwise
continuously while processing.
5.
After blending is complete, add your favorite toppings, such as
coconut flakes, granola, fresh bananas, berries, and agave nectar.
ALWAYS DO THIS FIRST.
Assembling the Power Nutri™ Bowl & Power Nutri Cup
Blending
OR
2.
If using the Power Nutri
Bowl, twist the Power
Paddle counterclockwise
continuously while
processing.
Taking It To Go?
Place the Storage Lid or Spout Lid on top
of the bowl or cup, and turn clockwise to seal.
SMOOTHIE BOWL
BASICS
USING THE POWER NUTRI
™
BOWL
PRESS THE POWER BUTTON TO TURN THE UNIT ON.
3. (Optional)
Amplify your base by adding
1 scoop of yogurt, flavor powder,
protein powder, and/or nut butter.
2.
Add frozen fruit, directly from freezer,
and/or açai or dragon fruit packets,
up to the MAX FILL line.
Cut larger fruit, like bananas, in quarters.
If using açai or dragon fruit packets,
thaw slightly and cut in quarters.
NOTE: DO NOT microwave or freeze the Power Nutri Bowl or Power Nutri Cup.
OR
WARNING: Handle the blade assembly with care, as the blades are sharp.
DID YOU KNOW?
Smoothie bowls are
thicker & spoonable,
compared to
smoothies which are
thinner & drinkable.

Ninja FOODI POWER PITCHER SYSTEM Specifications

General

Brand	Ninja
Model	FOODI POWER PITCHER SYSTEM
Category	Blender
Language	English