EasyManua.ls Logo

Ninja Hot & Cold Brewed System CP307 - Troubleshooting Guide; Common Brewing Issues; System Messages and Errors; Leaks and Cleaning Indicator

Ninja Hot & Cold Brewed System CP307
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
1-877-646-5288
ENGLISH
21
ninjakitchen.com
There’s sediment in my coee.
If using a permanent filter, the sediment at the bottom of the brewed coee may
be due to using finely ground coee.
To reduce the amount of sediment in the brewed coee, use a slightly coarser grind
or use a paper filter.
NOTE: We DO NOT recommended using a paper filter in conjunction with
the permanent filter, as clogging and backing up of water and/or coee in
the filter basket can occur.
OVER ICE Brew and COLD BREW are not cold.
Ensure your cup, travel mug, or carafe is filled all the way to the top with ice cubes
before brewing. Your Ninja Hot & Cold Brewed System™ will brew at elevated
temperatures to lock in the best flavor, then the ice will cool the brewed coee or
tea to the perfect temperature.
Coee or tea is too weak.
COFFEE: For stronger coee, use the RICH brew setting, try darker roast beans, or
use the permanent filter rather than a paper filter. If you want an even bolder flavor,
you can add more coee grinds to the brew basket. Additional grinds do absorb
liquid, so you will have a more concentrated, smaller cup of coee.
TEA: For stronger tea, use the RICH brew setting, or add more tea to the brew basket.
Coee or tea is too strong.
COFFEE: For milder coee, use the CLASSIC brew setting, use lighter roast beans,
or use a paper filter rather than the permanent filter. If you want an even milder
flavor, you can put fewer coee grinds in the brew basket.
TEA: For milder tea, use the CLASSIC brew setting, or use less tea in the brew basket.
Brew cycle is too slow.
Depending on your settings, your brew time will vary from around 4 minutes
to 18 minutes. The progress bar on the control panel will indicate brew status.
Cup or travel mug overflowed.
Ensure you are using at least a 12 oz. cup for the Cup size, 14 oz. cup for the
XL Cup size, 16 oz. travel mug for the Travel Mug size, and 20 oz. travel mug for the
XL Multi-Serve size.
Brew basket overflowed.
The bottom of the filter holder may be clogged. This can happen with finely
ground coee or too many coee grinds in the brew basket. Medium-ground coee
is recommended.
NOTE: When using a paper filter, do not use the permanent filter.
There’s water left in my reservoir.
The water reservoir markings are minimum fill lines that indicate the amount of
water needed for that brew size. However, all brew styles use dierent amounts of
water to create the proper flavor and concentration,
leaving some water to remain.
TROUBLESHOOTING GUIDE
My Ninja Hot & Cold Brewed System is leaking.
After removing the water reservoir, there may be a small amount of water in the
reservoir valve. This can be easily removed with a dry cloth.
If the leak is coming from the brew basket, make sure all parts are assembled
correctly and securely. If the leak is coming from the bottom of the brewer, call
Customer Service at 1-877-646-5288.
CLEAN light is on.
Run a clean cycle. If you have recently completed a clean cycle, you may need to run
a second cycle to remove additional mineral buildup that occurs naturally over time.
There’s no Rooibos or Pu’erh tea type setting.
Use the Herbal tea setting for Rooibos and the Black tea setting for Pu’erh.
CLOCK DISPLAY MESSAGES:
Add” “Wtr”
The system does not have enough water in the reservoir to complete your brew. Add
fresh water to the reservoir and then press the START/SELECT dial to resume.
“CLn”
The system has detected that a clean cycle needs be run immediately to remove
calcium scale buildup in the boiler. See ‘Cleaning & Descaling Your Brewing System’
for instructions.
“Hot” “Wtr”
The system has detected that hot water has been added to the water reservoir.
Remove the reservoir and empty the hot water. Refill the reservoir with fresh, cool
water and return it to the base of the system. Wait until the display no longer shows
“Hot” “Wtr” before using the system again.
ERROR MESSAGES:
“Er”
If the clock displays “Er” and then a number (ex. “Er 03”),
contact Customer Service at 1-877-646-5288.

Table of Contents

Related product manuals