ENGLISH
37 38ninjakitchen.eu
GETTING TO KNOW YOUR AIR FRYERPARTS & ACCESSORIES
1 Remove and discard all packaging material, promotional labels, and tape from the unit.
2 Remove all accessories from the package and read this manual carefully. Please pay
particular attention to operational instructions, warnings, and important safeguards
to avoid any injury or property damage.
3 Wash the pan and crisper plate in hot, soapy water, then rinse and dry thoroughly.
The pan and crisper plate are also dishwasher safe. NEVER clean the main unit in the
dishwasher.
4 When using this appliance, provide at least 6 inches (15 cm) of space above and on all
sides for adequate air circulation.
BEFORE FIRST USE
FUNCTION BUTTONS
MAX CRISP: Use to give frozen foods extra
crispiness and crunch with little to no oil.
AIR FRY: Use this function to give your food
crispiness and crunch with little to no oil.
ROAST: Use the unit as a roaster oven
for tender meats, vegetables and more.
BAKE: Create tasty baked treats
and desserts.
REHEAT: Revive leftovers by gently
warming them, leaving you with
crispy results.
DEHYDRATE: Dehydrate meats, fruits,
and vegetables for healthy snacks.
OPERATING BUTTONS
TEMP arrows: Use the up and down
TEMP arrows to adjust the cook
temperature in any function except MAX
CRISP before or during cooking.
TIME arrows: Use the up
and down
TIME arrows to adjust the cook time
in any function before or during cooking.
START/STOP button: After selecting the
time and temperature, start cooking by
pressing the START/STOP button. You can
stop cooking at any time by pressing the
button again.
The Power button shuts o the unit and
stops all cooking modes.
When setting time, the digital display shows HH:MM.
NOTE: After 10 minutes with no
interaction with the control panel, the
unit will enter standby mode. The Power
button will be dimly lit.
To order additional parts and accessories, visit ninjakitchen.eu.
Crisper Plate
Cooking Drawer
Control Panel
Air Intake Vent
Air Outlet Unit
(located on back)
Main Unit
(power cord not shown)
CRISPER PLATE POSTION
Upper Position: To place the Crisper Plate
in the upper position of the drawer, make
sure the cut outs are at the front and back
of drawer.
Lower Position: To place the Crisper Plate
in the lower position of the drawer, make
sure the cut outs are on the left and right
side of drawer.
To Next Page
Loading...
