Ninja NF700 Series User Manual

ninjakitchen.com
PROFESSIONAL XL
FOOD PROCESSOR WITH AUTO-IQ®
NF700 Series | Owner’s Guide
Read and review instructions for operation and use.
Indicates the presence of a hazard that can cause personal injury, death or substantial property damage if
the warning included with this symbol is ignored.
For indoor and household use only.
When using electrical appliances, basic safety precautions should always be followed, including the following:
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock or property damage, basic safety precautions
must always be followed, including the following numbered warnings and subsequent
instructions. Do not use appliance for other than intended use.
1 Read all instructions prior to using the appliance and its accessories.
2 Carefully observe and follow all warnings and instructions. This unit contains electrical connections
and moving parts that potentially present risk to the user.
3 Take your time and exercise care during unpacking and appliance setup. This appliance contains
sharp, loose blades that can cause injury if mishandled.
4 Take inventory of all contents to ensure you have all parts needed to properly and safely operate
your appliance.
5 Blades are sharp. Handle carefully.
6 This product is provided with a Chopping Blade Assembly. A LWAYS exercise care when handling
blade assembly. The blade assembly is sharp and is NOT locked in place in the container. The blade
assembly is designed to be removable to facilitate cleaning and replacement if needed. ONLY grasp
the blade assembly by the top of the shaft. Failure to use care when handling the blade assembly will
result in a risk of laceration.
7 Turn the appliance OFF, then unplug the appliance from the outlet when not in use, before
assembling or disassembling parts, and before cleaning. To unplug, grasp the plug by the body and
pull from the outlet. NEVER unplug by grasping and pulling the flexible cord.
8 Before use, wash all parts that may contact food. Follow washing instructions covered in this
instruction manual.
9 Before each use, inspect blade assemblies for damage. If a blade is bent or damage is suspected,
contact SharkNinja to arrange for replacement.
10 DO NOT use this appliance outdoors. It is designed for indoor household use only.
11 This appliance has a polarized plug (one prong is wider than the other). To reduce the risk of electric
shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. DO NOT modify the plug in any way.
12
DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions
or is dropped or damaged in any manner. This appliance has no user-serviceable parts. If damaged,
contact SharkNinja for servicing.

Ninja NF700 Series Specifications

General

Brand	Ninja
Model	NF700 Series
Category	Blender
Language	English

Summary

IMPORTANT SAFETY INSTRUCTIONS

General Safety Precautions

Key safety warnings and instructions for operating the appliance safely.

PARTS

Parts Identification

Identifies all components included with the food processor and optional accessories.

FEATURES

Auto-iQ Programs

Explanation of intelligent preset programs for automated blending and pausing.

Manual Programs

Overview of manual speed settings (Low, High, Pulse) for user control.

BEFORE FIRST USE

Preparation and Cleaning

Steps for unpacking, washing, and preparing the appliance before initial use.

GET TO KNOW THE ATTACHMENTS

Blade Assemblies

Details on the chopping and dough blade assemblies for the processor bowl.

3-Part Food Pusher

Explanation of the three-piece food pusher for different ingredient sizes.

Disc Assemblies

Information on adjustable slicing, reversible slicing/shredding, and reversible shredding discs.

Disc Spindle

Description of the disc spindle used with disc assemblies and nesting workbowl.

4.5-Cup Nesting Workbowl

Details on the smaller capacity nesting workbowl for reduced portion sizes.

USING THE BLADE ASSEMBLIES

Assembly and Operation

Step-by-step guide for installing and using blade assemblies in the processor bowl.

USING THE DISC ASSEMBLIES

Disc Assembly Installation

Instructions for installing reversible slicing/shredding, adjustable slicing, and reversible shredding discs.

Disc Operation

Guidance on using feed chute, pusher, and selecting programs for slicing/shredding.

USING THE NESTING WORKBOWL

Workbowl Setup and Use

Steps for installing and operating the nesting workbowl with the small chopping blade.

CARE & MAINTENANCE

Cleaning Procedures

Instructions for washing parts by hand or in a dishwasher and cleaning the motor base.

Storage Guidelines

Recommendations for storing the unit, power cord, and accessories safely.

Motor Thermostat Reset

Procedure to reset the motor thermostat if the unit overheats or overloads.

TROUBLESHOOTING GUIDE

Common Issues and Solutions

Addresses problems like unit not running, motor base movement, and uneven chopping.

Adjustable Slicing Disc Settings

Details on the number of settings and thickness range for the adjustable slicing disc.

Food Pusher Usage

Guidance on using different food pusher sizes for optimal slicing and shredding.

Dough Program Limitations

Explanation of the dough program's consecutive use limit and kneading instructions.

ONE (1) YEAR LIMITED WARRANTY

Warranty Coverage Details

Information on what is covered under the one-year limited warranty.

Exclusions from Warranty

Details on parts and conditions not covered by the manufacturer's warranty.

Service and Claim Process

Instructions on how to obtain service, initiate a warranty claim, and contact support.

REGISTER YOUR PURCHASE

Registration Information

Guidance on registering the product online or via QR code for warranty and support.

RECORD THIS INFORMATION

Product Details

Space to record model number, serial number, purchase date, and store.

Technical Specifications

Key technical details including voltage and power output of the appliance.