PROCESSING
CLEANING
Dishwasher: The container, lid, and
blade assemblies are all dishwasher safe.
The lid and blade assemblies are top-
rack dishwasher safe. Ensure the blade
assembly is removed from the container
before placing in the dishwasher.
Hand washing: Wash container, lid, and blade
assemblies in warm, soapy water. When washing
the blade assemblies, use a dishwashing utensil with
a handle to avoid direct hand contact with blades.
Handle blade assemblies with care to avoid contact
with sharp edges. Rinse and air-dry thoroughly.
WARNING: Handle the Chopping Blade Assembly with care when washing, as
the blades are sharp. Contact with the blades’ edges can result in laceration.
QUESTIONS? We’re here to help. Call 1-877-646-5288 or visit ninjakitchen.com
1.
Select the desired
program to begin.
2.
Remove bowl from
base by turning it
counterclockwise,
then lifting it up.
3.
Remove lid by pressing
the release button on
side of front tab, then
twisting counterclockwise
and lifting up.
4.
Remove blade
assembly before
emptying bowl.
WARNING: Chopping Blade Assembly is sharp and not locked in place. Before emptying
contents, carefully remove blade assembly. Failure to do so will result in a risk of laceration.
Refer to the Ninja Owner’s Guide for additional information.
Programs will illuminate once container is correctly assembled onto the base and the unit is conected to power.
Please make sure to read the enclosed Ninja® Owner’s Guide prior to using your unit.
NN300 SERIES
To Previous Page
Loading...
Need help?
General
