Nintendo GameCube Console Memory Battery Replacement Guide Page 9 of 10
Step Six
Now that the terminals are soldered on your circuit board should look something like picture six below.
Picture Six: Proper terminal soldering
Notice how the terminals have enough solder on them to make a firm connection, although not so much
that it bridges to solder joints? This is what you are aiming for. Once finished please reassemble your
system and try out your system. You will have to re-enter the date and time on last time, although the
battery should last for many years to come.
If your system is not operating like it should after you reassemble the system please see our
troubleshooting section at the end of this guide.
To Next Page