Chapter 3 Nasal NO measurements
10 002346-02 NIOX VERO
®
Nasal User Manual English
4. Start Nasal measurement by selecting the Nasal icon (A)
5. Enter patient ID (optional) and then start the nasal measurement by
pressing the start measurement button (B)
Note: If measurement is started before patient is ready, there is an option
to abort measurement, it is not recorded as a measurement on
sensor or instrument.
6. The instrument will aspirate for 30 seconds, and then will start to analyze
the sample. After the aspiration is complete, remove nasal olive from the
nostril and wait for the result.
To Next Page
Loading...
