9
OPERATION INSTRUCTIONS
Controls
After plugging the Beverage cooler into a wall outlet, the cooler would turn on automatically and
the LCD screen would show the temperature inside of the cooler.
After setting your desired serving temperature, allow the cooler to cool down for 3 to 4 hours
before placing wine bottles in the Beverage cooler.
Press to increase or press to decrease the temperature in 1 degree
increments between 5°C and 18°C or between 40°F and 65°F.
C
F
°
°
C
F
°
°
Toggles the temperature display between Celsius and Fahrenheit.
Press once to turn ON the cooler. Press and hold about 3 seconds to turn OFF
the cooler.
Press once to turn the interior light ON or OFF.
Press to begin temperature adjustment and ascertain the current temperature.
To Next Page
Loading...
General