Do you have a question about the Nissei DSK-1011 and is the answer not in the manual?
Measurement Method | Oscillometric |
---|---|
Measurement Range (Pressure) | 0-299 mmHg |
Cuff Size | 22-32 cm |
Measurement Range (Pulse) | 40-180 beats/minute |
Accuracy (Pressure) | ±3 mmHg |
Accuracy (Pulse) | ±5% of reading |
Memory | 60 measurements |
Diagram and labels for the main control unit of the blood pressure monitor.
Diagram and labels for the blood pressure cuff, hose, and air plug.
Specifies the intended use and limitations of the blood pressure monitor.
Explains the oscillometric method used by the device for readings.
Guidance on posture and cuff placement for accurate measurement.
Instructions for proper arm positioning during measurement.
Steps for powering on the device and initiating measurement.
Choose memory bank before measurement for personal mode.
Steps to power down the device after measurement.
How to access and review stored blood pressure readings.
How to navigate through saved readings in memory banks.
Steps to power down the device after viewing readings.
Procedure to remove single saved measurements from memory.
Method to clear all stored data from a memory bank.
Addresses readings that are unusually high or low and potential causes.
Explains variations in readings due to condition or environment.
Discusses discrepancies between home and clinical readings and causes.
Troubleshooting steps for a blank screen or no power indication.
Solutions for when the clock display is absent or not functioning.
Addresses issues with date/time display format.
Explains the meaning of the [0 0] error code and its resolution.
Instructions for securing a loose cuff for proper measurement.
Information on RF emissions and compliance with EMC standards.
Details on electromagnetic immunity and testing levels.
Safety guidelines for RF interference and optimal device placement.