Using the NiTek
30 NiTek Dive Computer User Manual
(5) Nitrogen (N2) exposure bar graph: This is the amount of
residual nitrogen in your body at the end of the dive.
(6) Oxygen OLI bar graph: This indicates CNS toxicity level at
the end of the dive.
(7) Dive number: This is the dive number for the day (first dive
of the day, second dive of the day, etc.).
(8) Dive time: This is the actual in water time for the dive.
(9) FO2 gas percentage: This is the FO2 gas percentage that
you entered for the dive. All calculations were based on this
percentage.
(10) Temperature: This is the coldest temperature reached
during the dive.
To view a dive log:
1. Press button B.
The arrow at the bottom of the display points to LOG.
2. Press button B to scroll back through the logged dives.
3. Once a dive log is selected, you can use button A to toggle
between pages one and page two of the dive log.
You can also press button B while on page two to scroll
through the logged dives.
4. When finished, press and hold button B for three seconds to
return to surface mode.
To Next Page
Loading...