5. Leaving the battery in the Docking Station indenitely will not
harm the battery. Every 24-hours the Docking Station will test
the battery level and apply a charge if required.
Warning: If the “Batt Error” indicator illuminates solid red contact
NiteRider Customer Service for assistance.
DOWNLOAD PROGRAMS FROM THE D.I.Y. SOFTWARE
To download Programs from the D.I.Y. Software, the Docking
Station must be powered by a wall outlet, the Docking Station must
be connected to the host computer and the headlamp must be
connected to the Docking Station.
1. Plug the AC Adapter into the Docking Station and then into
the wall socket. The “Power” indicator on the docking station will
illuminate solid red.
2. Plug one end of the USB Cable into the Docking Station and the
other end into the USB port of a computer. The “USB/PC”
indicator will illuminate solid yellow.
3. Connect the Pro Series headlamp to the Docking Station. The
“Headlamp” indicator will illuminate solid yellow.
4. Click the “Update” button on the D.I.Y. Software control panel
to initiate transmission of Programs to the headlamp. Refer to the
“D.I.Y. Pro LED Series Software Guide” for detailed information
on the software features and how they function.
5. Both the “USB/PC” and “Headlamp” indicators will blink
indicating Programs are being downloaded through the Docking
Station and into the headlamp.
6. With a successful download, the headlamp LED indicator
changes from red to green.
Warning: Disconnecting the headlamp from the docking station,
or the docking station from the computer, or disrupting power to the
docking station while transmitting Programs from the D.I.Y. Software
will create a problem. The headlamp will either not operate or
operate unpredictably. To correct this situation, disconnect power
to the docking station, wait 10 seconds, then reconnect power. The
D.I.Y. Software and docking station will reconnect, then repeat the
downloading process.
D.I.Y. SOFTWARE
The latest version of the D.I.Y Software is available to download at
www.niteriderservices.com. The software runs under Windows 2000
and above. For detailed information on the software please refer to
the “D.I.Y. Pro LED Series Software Guide”.
RIDING AT NIGHT
While a Pro Series lighting system will dramatically improve your
view, control and enjoyment of night riding, please remember that
cycling at night is an inherently dangerous activity. In addition to
using your lighting system properly and riding with extreme caution,
NiteRider urges you to:
• Never ride alone
• Always let someone know where you are going
• Wear a helmet and reective clothing
• Carry an auxiliary light and emergency supplies
• Make sure the headlamp, mounting bracket and Li-Ion battery
are securely fastened.
• Always disconnect the battery from the headlamp when
transporting the light system.
PROTECTING YOUR INVESTMENT
Properly charge your battery to maximize its lifespan (see the
“Battery Charging and Care” section for detailed information). When
not in use, always disconnect the headlamp from the battery tray.
To unplug, grasp the connector, not the cable.
The Pro Series will perform in wet weather conditions, but
submerging it in water will damage the system.
SUPPORT
If you experience difculties during product installation or operation,
NiteRider provides free telephone support on weekdays from 8:00
AM to 4:30 PM (Pacic Time) at 800.466.8366, extension 4. You may
also e-mail us at:
NiteRider Technical Lighting Systems, Inc.
8295 Aero Place, Suite 200
San Diego, Ca 92123
www.niterider.com
Support
niterider
To Previous Page
Loading...
