Need help?Do you have a question about the Nitgen NAC-2500 Plus and is the answer not in the manual?
General| Device Type | IP Access Controller |
|---|---|
| Model | NAC-2500 Plus |
| Fingerprint Sensor | Optical Sensor |
| FAR | 0.0001% |
| Fingerprint Capacity | 10, 000 |
| Log Capacity | 100, 000 |
| Max Users | 10, 000 |
| Max Events | 100, 000 |
| Operating Temperature | -10°C to 50°C |
| CPU | 32-bit RISC |
| Fingerprint Verification Time | < 1 second |
| FRR | 0.01% |
| RF Card | 125kHz |
| Communication Interface | TCP/IP, RS232, RS-485 |
| Power Supply | 12V DC |
| Humidity | 20% to 80% |
Follow the installation guide carefully for optimal product performance.
Details included components: terminal, adapter, power cord, case, and accessories.
Product designed for indoor use; avoid outdoor exposure to elements like sun or rain.
Bury cables, connect power last, and ensure optimal placement for efficient use.
Terminals connect via network for centralized control and remote management.
A single terminal operates independently for all user and access settings.
Prepare mounting surface and attach the rear case bracket securely.
Connect external devices like locking mechanisms and door open buttons.
Connect power, network, door control, and data transmission cables.
Securely mount the terminal unit to the prepared rear case.
Verify initial power-up, user registration, and device functionality in standalone mode.
Test network connectivity, user registration, and authentication via the manager.
To Next Page
