- 6 -
2. Installation Environment
Please keep in mind the following conditions when you install the
product. You might need to obtain the user's consent if necessary.
① This product is originally designed to install indoors. If you
have to install it outdoors, however, do not expose the terminal
to direct sunlight, snow or rain.
② The connection cables should not be exposed outside, and it
is highly recommended to bury them underground. If that is
impossible, you must obtain the user's consent before
installation.
③ Power supply should begin after all connections are completed.
Do not disconnect the lines or make any additional
connections while the power is supplied.
④ If you install the product as an access controller at a proper
height for the users and in a near place that facilitates control
of the entrance, you can use it more efficiently.
⑤ The power requirement for the system is AC 100~240V,
50/60Hz.
To Next Page
Loading...