Nitrox OR600 - Operational Instructions; First Assembling; Folding;Unfolding

3.1 First assembling
3.2 Folding/Unfolding
Instructions regarding installation and assembly, aimed at
reducing noise and vibrations:
Beforeusingtheequipment,tightenallthefasteningscrews
ofthescreenwiththeacceleratorandthebrakelever,
makingsurethatthesecomponentsarexedanddonot
move,toavoidvibrations.
Topreventthehandlebarvibrationsandshakingadjustand,
ifnecessary,loosenthescrewsinsidethehandlebarsleeves
whenfolded.
Beforeusingtheequipment,makesurethatthereareno
loosecablesontherearwheelandmotorpart,toavoid
highnoisefromthemotor.
Every2monthsitisrecommendedtocheckandtightenthe
nutsontherearwheelofthemotor,toavoidvibrationsand
highnoisefromthemotor.
3 OPERATIONAL INSTRUCTIONS
08
09