Need help?Do you have a question about the NIVELCO EchoTREK S-300 and is the answer not in the manual?
Explains how ultrasonic level metering works by measuring the time for sound pulses to travel to the material and back.
Provides general specifications including product name, materials, operating conditions, and outputs.
Lists technical specifications specific to different EchoTREK model types, including measuring distances and beam angles.
Lists available accessories for the EchoTREK series, including manuals, software, and mounting hardware.
Details the coding system for ordering different EchoTREK configurations, including range and output options.
Presents detailed physical dimensions and drawings for different EchoTREK models (SOD-33J/X and SOD-31J/X).
Guidance on selecting the optimal location for the transmitter to ensure accurate measurements and avoid interference.
Advice on selecting the best location for installation in tanks using gravity filling methods.
Advice on selecting the best location for installation in tanks using pneumatic filling methods.
Instructions for mounting the EchoTREK transmitter onto the tank roof using flanges and ball-joint housing.
Step-by-step guide for mounting EchoTREK models S□□-33J and S□□-34J on tank roofs.
Procedure for mounting EchoTREK S□□-31□ models with a 300 mm roof opening.
Instructions for mounting EchoTREK S□□-31□ models when roof opening is <300mm and access is from inside.
Guidance on tilting the sensor to optimize signal reflection and ensure accurate measurements, especially in dusty environments.
Details on how to connect wires in different groups (A, B, C) and grounding requirements for the device.
General| Brand | NIVELCO |
|---|---|
| Model | EchoTREK S-300 |
| Category | Transmitter |
| Language | English |
To Next Page
