6.2 NETWORK SETTINGS
To connect to another WiFi network:
1. Use the UP/DOWN arrows on the Remote Control
2. Press OK to select your WiFi.
3. Enter your WiFi password (if required) and then select the Connect button
6.3 DISPLAY AND VOLUME
Volume - Change the volume of the speakers (for future updates)
Brightness - Adjust the screen's brightness.
Light Sensor (checkbox) - Enable/Disable the Light Sensor.
Important Note: Even when the Light Sensor is enabled, you can still adjust the
brightness by moving the brightness slider bar. After choosing your preferred brightness
level, the frame will now use it as the 'standard' brightness and will adjust to the
ambient light level accordingly. (please see section 7)
6.4 TIME ZONE SETTINGS
Set the time that is displayed on your Cloud Frame by selecting Set Time Zone. Once you
have chosen the correct time zone, press OK and your Cloud Frame will be updated to
reflect the changes.
6.5 SOFTWARE UPDATE
To get the latest features and for us to continually improve upon your Nixplay Cloud
Frame, we require you do a software update. Your Cloud Frame will check for any
software updates when it starts up after being powered off or unplugged.
Important Note: It is critical that you do not switch off or unplug your Cloud Frame
during the update process.
7
To Next Page
Loading...
